Rounded edge
You are here: Home > Applications > Pipelines

Pipelines

Buried steel pipes will corrode unless coated and any damage to the coating will cause that area to corrode more quickly. Pipes can be checked after the manufacturing process and inspectors will normally perform further on-site tests during installation before a trench is back-filled.

A high voltage holiday detector is a quick and effective means of locating defects and faults in the coating (either enamel or tar wrap).

PD30P Pipeline Test Kit

All the necessary equipment to perform basic tests on non-conductive pipe coatings with thicknesses of between 16 microns and 14.4mm.

Image of PD30P Pipeline Test Kit

PD 6 Pipeline Test Kit

All the necessary equipment to test non-conductive pipe coatings or linings with thicknesses of between 4 microns to 576 microns.

Image of PD 6 Pipeline Test Kit

PHD 1-20 Pipeline Test Kit

Contains all the equipment to perform basic tests on non-conductive pipe coatings and linings with thicknesses of between 20 microns and 6.5mm.

Image of PHD 1-20 Pipeline Test Kit

PHD 2-40 Pipeline Test Kit

Contains all the equipment to test non-conductive pipe coatings or linings with thicknesses of between 60 microns and 26mm.

Image of PHD 2-40 Pipeline Test Kit

PD40P Pipeline Test Kit

All the necessary equipment to perform basic tests on non-conductive pipe coatings with thicknesses of between 64 microns and 26.6mm.

Image of PD40P Pipeline Test Kit
Rounded edge
Red edge