Rounded edge

Plastic Sheeting

Welded or overlap joints in PVC sheets can be tested for defects by using a DC Holiday Detector or a high voltage AC Spark Tester.

Spark Testers provide an inexpensive means of testing but have no output voltage meter or audible alarm. However, they can test joints even if the backing is not connected.

Pinhole / Holiday Detector PD30 and Accessory Kit

super lightweight, easy to use, fully portable Pinhole/Holiday
Detector for testing of coatings, linings & membranes with coating
thicknesses between 16 microns and 14.4mm.

Image of Pinhole / Holiday Detector PD30 and Accessory Kit

Pinhole / Holiday Detector PHD 1-20

Lightweight portable Pinhole / Holiday Detector unit for testing coatings, linings and membranes with coating thicknesses of between 20 microns and 6.5mm.

Image of Pinhole / Holiday Detector PHD 1-20

Pinhole / Holiday Detector PHD 2-40

Lightweight portable Pinhole / Holiday Detector unit for testing coatings, linings and membranes with coating thicknesses of between 60 microns and 26mm.

Image of Pinhole / Holiday Detector PHD 2-40

ST-AC 100 Spark Tester

Used for inspection (Spark Testing) of thicker coatings and linings (1-30mm) in the Pipeline Construction, Petro-Chemical and Plastic & Rubber industries.

Image of ST-AC 100 Spark Tester

PPM Mk.3 Spark Tester

Used for inspections of thicker coatings and linings (3-30mm) in the Pipeline Construction, Petro-Chemical and Plastic & Rubber industries. Suitable for intermittent use.

Image of PPM Mk.3 Spark Tester

Pinhole / Holiday Detector PD40 and Accessory Kit

super lightweight, easy to use, fully portable Pinhole/Holiday
Detector for testing of coatings, linings & membranes with coating
thicknesses between 64 microns and 26.6mm.

Image of Pinhole / Holiday Detector PD40 and Accessory Kit
Rounded edge
Red edge