Rounded edge
You are here: Home > Applications > Roofing

Roofing

Leaks in flat roofs can be located by using Buckleys new “Wet Roof Leak Detector Kit”.  The equipment is suitable for all roofs constructed with non-conductive insulation materials.  A wet surface is necessary for the
test to be effective.

Waterproof membranes can be tested for pinholes and porosity by using a High Voltage Detector. For the test to be effective, the membrane must have a conductive backing i.e. PVC on steel, felt on concrete or foil-backed insulation board.

Faults through the membrane can be easily located by passing a high voltage across the surface using a brush or roller electrode. The new PD130 is recommended as it is suitable for membrane thicknesses of 16 microns to 14.4mm.  Alternatively, the PHD 2-40 (60 microns to 26mm) or the PHD 1-20 (20 microns to 6.5mm) can be used.

PD30R Roofing Test Kit

This kit includes all the equipment to test a roof or bridge deck for pinholes. Suitable for membrane thicknesses of between 16 microns and 14.4mm.

Image of PD30R Roofing Test Kit

PHD 1-20 Roofing / Bridge Deck Kit

Contains all the equipment to test a roof or bridge deck for pinholes. Membrane thicknesses of between 20 microns and 6.5mm can be tested.

Image of PHD 1-20 Roofing / Bridge Deck Kit

PHD 2-40 Roofing Test Kit

Contains all the equipment to test a roof for pinholes and porosity. Membrane thicknesses of between 60 microns and 26mm can be tested.

Image of PHD 2-40 Roofing Test Kit

Wet Roof Leak Detector – Vector Mapping

The kit will find leaks in roofs constructed with non-conductive insulation materials. For the test to be effective, the surface of the roof must be wet.

Image of Wet Roof Leak Detector – Vector Mapping

PD40R Roofing Test Kit

This kit includes all the equipment to test a roof or bridge deck for pinholes. Suitable for membrane thicknesses of between 64 microns and 25.6mm.

Image of PD40R Roofing Test Kit
Rounded edge
Red edge