Underwater Corrosion Monitoring Equipment
Buckleys sub-sea inspection equipment allows accurate corrosion monitoring of underwater structures including: jetties, drilling platforms, ship’s hulls and sub-sea pipelines.
Buckleys Bathycorrometer®
A diver-held corrosion voltmeter used to measure the corrosion potential of immersed structures accurately.
Surface Display Unit
Provides remote verification of the reading from the Bathycorrometer®. The two are connected by a special, robust water-resistant cable.
UCP1A Contact Probe
Used to carry underwater cathodic protection potential measurements when direct contact with structures is not possible. Specially designed for use with manned or Remotely Operated Vehicles (ROVs).
UCP1B Proximity Probe
Used to carry underwater cathodic protection potential measurements when direct contact with structures is not possible. Specially designed for use with manned or Remotely Operated Vehicles (ROVs).
Calibration Kit
Contains all the necessary components to verify the accuracy of the readings on the Bathycorrometer®.
BCM Checker
Designed to verify the accuracy of the electronics inside the Bathycorrometer® without breaking the water seal.
K-Series Reference Cell
Designed to be used to detect accuracy of cells in a Bathycorrometer® quickly and easily.
Marine Reference Cell
Designed to be connected to a separate high impedance meter and installed on surface structures such as jetties for easy monitoring of corrosion.
Retro-fit Kit
As replacement parts are no longer available, Buckleys has developed a kit to update the original Roxby Bathycorrometer® bodies.
Silver/Silver Chloride Half Cell
A replacement cell for the Bathycorrometer® and the Contact/Proximity Probes.
